How to Remove Windshield Wiper Arms

RESOURCE

THAN 16 YEARS OF MANUFACTURING EXPERIENCE

How to Remove Windshield Wiper Arms

Postview: 130       Date:May 19, 2023

Remove Windshield Wiper Arms

Windshield wiper arms are an essential component of any vehicle. They help to ensure clear visibility while driving, especially during inclement weather conditions. However, they can become damaged or worn out over time, necessitating their removal. In this comprehensive guide, we will walk you through the steps involved in removing windshield wiper arms. Additionally, we will provide some tips and tricks to make the process easier and more efficient.

 

Step 1: Park Your Vehicle on a Level Surface

The first step in removing windshield wiper arms is to park your vehicle on a level surface and turn off the engine. This will ensure that the wiper arms do not accidentally activate during the removal process.

 

Step 2: Lift the Wiper Arm

Next, lift the wiper arm so that it is perpendicular to the windshield. You may need to use a screwdriver or other tool to pry the arm up if it is stuck.

 

Step 3: Locate the Release Tab

Once the wiper arm is lifted, locate the release tab at the base of the wiper arm. This tab is typically located on the underside of the wiper arm, near the base where it attaches to the vehicle.

 

Step 4: Press the Release Tab

Press the release tab using a small screwdriver or other tool. This will release the tension on the wiper arm allow you to easily remove it from the vehicle.

 

Step 5: Wiggle the Wiper Arm

Once the release tab has been pressed, wiggle the wiper arm back and forth while pulling it away from the windshield. The arm should come off easily, but if it is stuck you may need to use a bit more force.

 

Step 6: Repeat for the Other Arm

Repeat steps 2 through 5 for the other windshield wiper arm. It is important to remove both arms before attempting to replace them.

 

Step 7: Replace the Arms

Once both arms have been removed, you can replace them with new ones. Simply slide the new arms onto the wiper shafts and press down until they click into place.

 

Tips and Tricks

– Before attempting to remove the wiper arms, it may be helpful to mark their placement on the windshield with a small piece of tape. This will ensure that they are reinstalled in the correct position.
– If the wiper arm is stuck, try spraying some penetrating oil or lubricant around the base to help loosen it.
– If you do not have a small screwdriver or other tool to press the release tab, a paperclip or other small, pointed object may work just as well.

 

Conclusion

Removing windshield wiper arms is a relatively straightforward process that can be completed with a few basic tools. By following these steps and tips, you can ensure that your wiper arms are properly removed and replaced, allowing your vehicle’s wipers to function effectively.