The windshield wiper blade creaked

 

The croaking of the wiper blade scraping the glass is actually a very common driving problem .

But this kind of noise is always very uncomfortable , so it is better to solve it as soon as possible .

 

So how to eliminate the rubbing noise of the wiper blade and the glass ?

First of all , we need to understand what causes the abnormal noise of the wiper blade .

 

The reason why the wiper blade causes the glass to croak

 

1 、Foreign matter on the wiper blade

 

If there is a foreign body between the wiper blade and the windshield ,

not only will there be a croaking noise when the glass is being scraped , but also the scraping effect will be greatly affected , and there will be a certain safety hazard .

 

Therefore , after passing through places with relatively poor road conditions , it is best to check the wiper blades for foreign objects , and clean them as soon as possible .

 

wiper blade creaked

 

2 . The quality of the wiper blade

 

Bad quality wiper blades have poor resistance to the rubber components inside .

They are prone to rubber aging ( rough ) under long-term sun exposure , and there will naturally be croaking noises under working conditions .

At this time , we only need to use abrasive paper to smooth the rubber .

 

3 . Angle of wiper blade

 

The angle of the wiper blade is also one of the factors , because the wrong angle will cause the wiper blade to jump on the windshield , causing abnormal noise ;

at this time , the owner only needs to adjust the angle by himself .

Of course , the pressing force of the wiper should not be too large , otherwise it will aggravate the abrasion of the glass .

 

4 . There is a problem with the linkage mechanism 

 

The problem of the linkage mechanism is generally due to continuous use or irregular use , resulting in deformation , rust, and abnormal noise .

 

In normal use , do not use it for a long time or use it continuously . It is best to have a few seconds in between .

 

Especially in winter , if the wiper blade is frozen , you must not use the wiper blade compulsorily . You must wait for it to defrost before using it .

 

If the wiper is not clean , the simplest and most effective solution is to replace the wiper blade directly .

 

Generally , the wiper blade is recommended to be replaced every 6-12 months .

 

Welcome to send us email to get the newest quotation .

we will send you our newest catalog , or free samples , even some gift for your inquiry .

There is a big surprise waiting for you .

E-MAIL: [email protected]

WEB: https://www.topexwiper.com