Wiper disassembly guide!

TOPEX|Wiper Blades > Blog > Wiper disassembly guide!

☞ ☞ Disassembly installation guide:

 

 

 

 

First, be ready to remove the wrench used in the wiper. 

 

To avoid damage to the windshield during the demolition process, it is recommended to place a piece of cloth on the windshield when the car owner dismantles the windshield.Support the wiper blade to change the Angle of the blade.

 

Secondly, it is better to change the Angle of the rain blade to a 90-degree Angle with the wiper arm.Rotate clockwise or counterclockwise.

Because the wiper blade and the swing arm are stuck with the clip, it is easy to disassemble after a certain Angle.

 

After the Angle is placed, you can begin to disassemble. First, you should lift the rubber blade with one hand to expose the fixed hook of the windshield wiper blade.Wiper blade as a whole, one hand under the lateral break rubber scrubbers, another hand down hard, according to the main bracket, separate the wiper blade and the swing arm, after that the wiper blade as a whole can be scored. With a wrench, it’s easy to do, isn’t it easy.

 

 

You are welcome to send us an email to know the latest information about wipers. If you are interested, we will send you the latest catalogue, or free samples, or even the gifts you asked for.There’s a big surprise waiting for you .

 

Email :  [email protected]

Website:  www.topexwiper.com.