The wiper shakes eight reasons &Topex tells you the solution!!!

TOPEX|Wiper Blades > Blog > The wiper shakes eight reasons &Topex tells you the solution!!!

The wiper is an important guarantee for the car friends’ driving sight, and the shaking wiper will not only cause the abnormal noise, but also can not guarantee the driving sight!



 Jitter reason 1: there are impurities and foreign bodies on the surface of the glass.

This is the case when the wind blows to a certain position and the drag increases, causing jitter.

Solution: wipe the rain, the glass on the foreign body wipe clean.


② Jitter reason 2: rain slicing aging, hardening.

The rubber strip is made of rubber, which will deteriorate after being used. It will not fit well with the glass, causing the shaking.

Solution: the rain will be changed every year, if the tape has the appearance of aging needs to be replaced in time!


③ Jitter reason 3: it is not suitable for the Angle of the glue stick and the glass.

Some of the rain-scraping strips are pressed on the glass, but the force part is relatively small, and it is easy to force uneven force when the rain is blowing, causing jitter.

Solution: Adjust the Angle of the rain and glass to make the force even!


④ Jitter reason 4: the clearance of the connecting shaft of the rain is too large.

There will be more “active space” in the large interaxial gap, which is very helpful for “jitter”.

Solution: Adjust the shaft clearance properly.


⑤ Jitter reason 5: the continuous support has been impacted and deformed.

Due to the impact of the car accident and so on, it causes the deformation of the connecting bracket, which causes the rain to not fit, and the force is uneven, causing the shaking.

Solution: Reduce the deformation, keep the adhesive force uniform, and replace the wire-scraping support when necessary.


⑥ Jitter reason 6: the rain-scraping arm connecting the shaft of the shaft is loose.

The fixing of the rain arm is not in place, resulting in no firm fixed point during the wiper movement, causing the wobble.

Solution: Tighten the screws and the rain will be fixed.


⑦ Jitter reason 7: the tooth disc of the wiper blade is worn seriously.

When the tooth disc of the wiper blade is worn seriously, the movement of the rain is not stable, causing the shaking.

Solution: Replace the wiper motor assembly when seriou


⑧ Jitter reason 8: oil film on windshield.

The oil film on the windshield will cause the adhesive to be closed and uneven.

Solution:Clean the oil film with the wiper and keep the windshield clean.



Topex warm reminder: to drive well must have a good line of sight, the wiper is the protection god of the sight, it is necessary to keep the wiper working properly !


 You have better suggestions or more ideas, please communicate with us ~ ~

We promise to reply in 24 hours.