{"id":10274,"date":"2022-03-30T01:55:23","date_gmt":"2022-03-30T01:55:23","guid":{"rendered":"http:\/\/topex.dfsj.net\/blog\/common-problems-and-solutions-for-wiper-blades\/"},"modified":"2022-04-11T07:13:12","modified_gmt":"2022-04-11T07:13:12","slug":"common-problems-and-solutions-for-wiper-blades","status":"publish","type":"blog","link":"https:\/\/www.topexwiper.com\/ru\/blog\/common-problems-and-solutions-for-wiper-blades\/","title":{"rendered":"Common problems and solutions for wiper blades"},"content":{"rendered":"

<\/h3>\n

1. There is a water band after scraping<\/strong><\/h4>\n

 <\/p>\n

Reasons and countermeasures :<\/strong><\/h5>\n

 <\/p>\n

A. The rocker arm pressure is not enough . Choose a wiper with a shorter size .<\/strong><\/p>\n

B. The wiper structure is damaged ( the movable part of the wiper blade is stuck , <\/strong><\/p>\n

the inner shrapnel of the rubber strip is deformed ) ; straighten the rubber inner shrapnel or replace the wiper .<\/strong><\/p>\n

C. The wiper rubber is worn and replace the wiper rubber or wiper blade .<\/strong><\/p>\n

D. There are stains and dust attached to the adhesive strip . <\/strong><\/p>\n

Wipe back and forth with a wet towel to clean the rubber knife edge .<\/strong><\/p>\n

 <\/p>\n

2. Fuzzy and waterline stripes<\/strong><\/h4>\n

 <\/p>\n

Reasons and countermeasures :<\/strong><\/h5>\n

 <\/p>\n

A. Improper installation , removal and re-installation: the wiper and the wiper arm should rotate flexibly .<\/strong><\/p>\n

B. The wiper rubber is worn and replace the wiper rubber or wiper .<\/strong><\/p>\n

C. The shrapnel on the inner side of the rubber is deformed , straighten the shrapnel on the inner side of the rubber or replace the wiper .<\/strong><\/p>\n

D. Dirty glass to remove dirt on the surface of the glass .<\/strong><\/p>\n

E. There are stains and dust attached to the rubber . Wipe back and forth with a wet towel to clean the rubber blade .<\/strong><\/p>\n

 <\/p>\n

3. Fine water droplets shape<\/strong><\/h4>\n

 <\/p>\n

Reasons and countermeasures :<\/strong><\/h5>\n

 <\/p>\n

A. Car wax , oil stains or silicide stick to the windshield to remove the adhesions on the surface of the glass .<\/strong><\/p>\n

B. Silicone wiper rubber caused by the wiper rubber itself is normal .<\/strong><\/p>\n

 <\/p>\n

 <\/p>\n

4. Kata or other noises<\/strong><\/h4>\n

 <\/p>\n

Reasons and countermeasures :<\/strong><\/h5>\n

 <\/p>\n

A. After the movable part of the wiper blade is stuck and disassembled , check whether there is any foreign matter in the connecting part of the wiper blade and the wiper arm . <\/strong><\/p>\n

If there is foreign matter , remove the foreign matter . <\/strong>If the structure is damaged, replace the wiper blade .<\/strong><\/p>\n

B. The glass is waxy . Remove the wax on the glass .<\/strong><\/p>\n

C. The wiper rubber is aging or the structure design is unreasonable . Replace the wiper rubber or wiper .<\/strong><\/p>\n

D. The angle of the wiper arm and the glass is unreasonable , the brush head and the arm rod are not flexible , adjust the wiper arm to a suitable angle or replace the wiper .<\/strong><\/p>\n

E. The wiper arm output shaft gap is loose and replace the wiper arm or wiper connecting rod .<\/strong><\/p>\n

 <\/p>\n

 <\/p>\n

5. There is fog on the glass<\/strong><\/h4>\n

 <\/p>\n

Reasons and countermeasures :<\/strong><\/h5>\n

 <\/p>\n

A. Pressure dirt or car wax on the surface of the glass and rubber strips ; remove dirt or car wax on the glass and wiper rubber .<\/strong><\/p>\n

B. The wiper rubber is worn out . Replace the wiper rubber or wiper blade .<\/strong><\/p>\n

C.The wiper rubber is too soft ( the hardness is too small ). Replace the wiper rubber or wiper blade , or choose a longer wiper blade .<\/strong><\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

1. There is a water band after scraping   Reasons and countermeasures :   A. The rocker arm pressure is not enough . Choose a wiper with a shorter size . B. The wiper structure is damaged ( the movable part of the wiper blade is stuck , the inner shrapnel of the rubber strip… Continue reading Common problems and solutions for wiper blades<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":10275,"parent":0,"menu_order":39,"comment_status":"open","ping_status":"open","template":"","format":"standard","meta":{"footnotes":""},"news":[91,92],"class_list":["post-10274","blog","type-blog","status-publish","format-standard","has-post-thumbnail","hentry","news-industry-blog","news-company-blog","entry"],"acf":[],"post_mailing_queue_ids":[],"_links":{"self":[{"href":"https:\/\/www.topexwiper.com\/ru\/wp-json\/wp\/v2\/blog\/10274","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.topexwiper.com\/ru\/wp-json\/wp\/v2\/blog"}],"about":[{"href":"https:\/\/www.topexwiper.com\/ru\/wp-json\/wp\/v2\/types\/blog"}],"author":[{"embeddable":true,"href":"https:\/\/www.topexwiper.com\/ru\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.topexwiper.com\/ru\/wp-json\/wp\/v2\/comments?post=10274"}],"version-history":[{"count":0,"href":"https:\/\/www.topexwiper.com\/ru\/wp-json\/wp\/v2\/blog\/10274\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.topexwiper.com\/ru\/wp-json\/wp\/v2\/media\/10275"}],"wp:attachment":[{"href":"https:\/\/www.topexwiper.com\/ru\/wp-json\/wp\/v2\/media?parent=10274"}],"wp:term":[{"taxonomy":"news","embeddable":true,"href":"https:\/\/www.topexwiper.com\/ru\/wp-json\/wp\/v2\/news?post=10274"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}