Nov 18, 2026
Replacing the wipers on a Tesla Model 3 or Model Y is fairly straightforward once you have the right blades. The catch is that the two cars do not necessarily use the same passenger-side size, and blade length alone won’t tell you whether a replacement will fit the arm.
Here’s what to check before ordering, followed by a practical guide to changing the blades without damaging the hood or windshield.
The following sizes are commonly listed for these models. Treat them as a starting point, not a substitute for checking your car’s model year and original blade fitment.
| Model | Driver Side | Passenger Side |
|---|---|---|
| Model 3 | 26 in (650 mm) | 19 in (475 mm) |
| Model Y | 26 in (650 mm) | 20 in (500 mm) |
The driver-side blade is generally 26 inches on both. It’s the passenger side that is easy to mix up: typically 19 inches for the Model 3 and 20 inches for the Model Y. You may also see slightly different metric equivalents in online catalogs because inch sizes are rounded.
If a retailer lists one set for both vehicles, check the passenger-side length carefully. For older vehicles, revised models, or an uncertain listing, confirm fitment using the owner’s manual, the existing blades, and the supplier’s model-year application data.
A correctly sized blade still needs the right attachment. Model 3 and Model Y wiper arms use a specific connector arrangement, and many universal blades will only fit with the appropriate adapter. A generic 26-inch blade intended for a hook-style arm may be the right length but the wrong product.
Before you buy, look for a listing that identifies your exact Tesla model and year. Check the connector shown in the product photos against the blade already on the car. If the fitment details are vague, an OE-style direct-fit option is usually the easier choice.
Avoid trying to force a connector that does not seat properly. If it won’t lock securely, stop and recheck the part number or adapter instead of testing it on the windshield.
On Tesla vehicles, the wiper arms rest close to the edge of the hood, making them difficult to lift when parked normally. Forcing them up can damage the arms or scratch the paint. To avoid this, Tesla includes a Wiper Service Mode that moves the blades into a more accessible position.
To activate it, put the car in Park, turn off the wipers, and go to Controls > Service > Wiper Service Mode on the touchscreen. The wipers will move up the windshield, giving you room to replace the blades. The menu may look slightly different depending on your Tesla model or software version.
Before removing the blades, place a folded towel on the windshield to protect the glass if an arm slips. Keep a firm hold on the wiper arm while working, and avoid lifting it beyond its normal range of movement.
With the wipers in service mode, carefully lift and support one arm. Place a towel on the glass beneath it.
Locate the release tab or locking mechanism on the existing blade. Release it and slide the blade off the arm as directed by its connector.
Align the new blade with the attachment and slide it into place until it locks.
Gently check that the blade is secure. It should not slide off or feel loose.
Lower the arm back onto the glass by hand, then repeat on the other side.
Turn Wiper Service Mode off to return the arms to their normal parked position.
Take particular care once the old blade is off. An uncovered metal arm can damage the windshield if it snaps back. Keeping a hand on the arm is more important than working quickly.

Wet the windshield with washer fluid, then run the wipers and watch their movement. Both blades should travel smoothly, clear the intended area, and park normally. If you hear chattering or see a missed patch, check that the blade is fully seated and that the length and connector match your vehicle.
Replace blades when they begin to streak, skip, or leave water behind. An annual inspection is a useful habit, but exposure to sun, dust, ice, and road grit can mean they need attention sooner.
No. The driver-side length is only one part of the fit. You also need the correct connector and a blade specified for your model and year.
Not automatically. Their driver-side lengths are commonly the same, but the passenger-side blades are typically different. Check both sides before purchasing a pair.
Yes, when the wipers are parked under the hood edge. Service mode provides the clearance needed to access the blades without forcing the arms past the hood.
Not sure which blades to order? Share your Tesla model and model year with the TOPEX team, and we can help you check the size and connector before you choose a replacement set.
--- END ---